Slide Learn to use Latabo How to hold books 1 Pass the strap through the oval-shaped hole on the top of the platform and loop the strap to stick to itself. 2 3 Pass the strap through the oval-shaped hole on the bottom of the platform and pull that taut. Then, stick that to itself as done previously. Remember not to strap some pages of the book which you intend to study (a maximum of 100 pages) These sheets are sustained by the holders. Finally, place the tip of the holders on the page you are reading. 4 5

Slide How to hold Laptops 1 Rotate the platform to the angle where the four raised plastic edges (used to support books) are located on the top of the platform. Turn the page holders away from the platform and lay the laptop on it. Use a long cord (15.5”) to do so. While mounting the cords, metal fasteners go through the holes on the platform and lie on the backside. 2 Pull the cord from a point near one end and pass the fastener through one of the two holes (indicated in the picture), and then release the cord. All in all, as far as elasticity and resistance are concerned, the cords have designed to serve both convenience and safety. 3

Slide How to release Laptops 1 To release the laptop, first with one hand pull the cord from a point near one end outward to loosen the fastener. Then, use your other hand to take the fastener out from the hole (indicated in the picture), and it will be released. 2 Take care not to grasp the metal fastener in order to release the cords, but pull the cord from a point near one end away from the device.

Slide How to hold Tablets 1 Mount the four medium-sized elastic cords (6.5”) as per the picture. Rotate the platform to the angle where the four raised plastic edges (used to support books) are located on the top of the platform. Turn the page holders away the platform and lay the Tablet on it. Prior to laying the Tablet on the platform, place the cords with appropriate distance to be completely taut while they are holding the device. 2 While mounting the cords, metal fasteners go through the holes on the platform and lie on the backside. When you should mount the second cord, push the device lightly toward the first cord so as to make adequate room for the second cord and make sure the third and the fourth cords go over the Tablet tautly. 3 4

Slide How to hold Phones 1 Mount the two short elastic cords (4.5”) as per the picture. While mounting the cords, metal fasteners go through the holes on the platform and lie on the backside. Place the cell phone in the desired spot on the platform. Prior to laying the phone on the platform, place the cords with appropriate distance to be completely taut while they are holding the device. 2 After placing the first cord on the device, for the second cord, push the phone toward the first cord to allow sufficient space for the second cord. 3 4

Slide Neck and Spine Health Learn to Use Faq About Us Sales and Discounts Warranty Return Policy Contact Copyright © 2019 Latabo. All rights reserved. Terms of Use Privacy Policy Sales and Discounts Warranty Return Policy Contact Neck and Spine Health Learn to Use FAQ About Us LATABO Book & Gadget Holder